super bright round type led lamps doc. no : qw0905- rev. : date : - 2007 12 - may LHR3630-PF a data sheet LHR3630-PF ligitek electronics co.,ltd. property of ligitek only lead-free parts pb
note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. directivity radiation package dimensions part no. LHR3630-PF 25.0min 1.0min 2.54typ + - 0.5 typ 13.5 2.0 1.5max ligitek electronics co.,ltd. property of ligitek only page 1/5 11.0 10.0 50% 75% 100% -60 -30 25% 0 25% 50%75%100% 0 60 30
-40 ~ +100 tstg storage temperature emitted typical electrical & optical characteristics (ta=25 ) note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. part nomaterial LHR3630-PF viewing angle 2 1/2 (deg) peak wave length pnm spectral halfwidth nm min. lens 220 typ. max. 120 min. 42 forward voltage @20ma(v) color luminous intensity @20ma(mcd) absolute maximum ratings at ta=25 forward current operating temperature reverse current @5v power dissipation peak forward current duty 1/10@10khz parameter ratings -40 ~ +85 i f t opr ir i fp pd symbol ma a mw ma unit ligitek electronics co.,ltd. property of ligitek only page 2/5 hr 30 100 100 10 gaalas red red diffused 660201.5 2.4 part no. LHR3630-PF
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( ) r e l a t i v e i n t e n s i t y @ 2 0 m a wavelength (nm) f o r w a r d v o l t a g e @ 2 0 m a fig.4 relative intensity vs. temperature ambient temperature( ) r e l a t i v e i n t e n s i t y @ 2 0 m a typical electro-optical characteristics curve forward voltage(v) fig.1 forward current vs. forward voltage f o r w a r d c u r r e n t ( m a ) forward current(ma) fig.2 relative intensity vs. forward current r e l a t i v e i n t e n s i t y @ 2 0 m a ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0101001000 0 0.5 -40-20-020 600650 0 2.03.04.05.0 4060 0.8 -0 -20 -404060 20 0 0.5 0.9 1.0 1.1 1.2 1.0 1.5 2.0 650700750 0.5 1.0 1.0 1.5 2.0 2.5 3.0 100 80100 80 2.5 3.0 hr chip page 3/5 part no. LHR3630-PF
ligitek electronics co.,ltd. property of ligitek only soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time only) distance:2mm min(from solder joint to body) note:1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. dip soldering preheat: 120 c max preheat time: 120seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 120 seconds max 25 0 0 120 2 /sec max preheat 100 260 temp( c) 2.wave soldering profile 5 /sec max time(sec) 200 250 260 c3sec max page 4/5 part no. LHR3630-PF
mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. solder resistance test 1.t.sol=260 5 2.dwell time= 10 1sec. this test intended to see soldering well performed or not. solderability test 1.t.sol=230 5 2.dwell time=5 1sec mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 ligitek electronics co.,ltd. property of ligitek only the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. the purpose of this test is the resistance of the device under tropical for hours. the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) operating life test high temperature storage test low temperature storage test high temperature high humidity test thermal shock test 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) reliability test: test itemtest condition description mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 mil-std-202:103b jis c 7021: b-11 mil-std-883:1008 jis c 7021: b-10 jis c 7021: b-12 page 5/5 reference standard part no. LHR3630-PF
|
